"Ceramir CAD/CAM BLOCKS dramatically reduced our chairside time. The natural aesthetics are outstanding."
No Firing Required
Mill, polish, and cement — no furnace
Short Milling Time
Helps clinicians complete restorations more efficiently.
Easy Chairside Repair
Can be repaired with composite – if needed.
Directa AB
Ceramir® CAD/CAM BLOCK
Ceramir® CAD/CAM T-BLOCKS deliver high translucency that closely mimics natural enamel — giving dental professionals the possibility to create restorations that blend naturally with surrounding teeth.
- Size: Standard 12 × 14 × 18 mm
- Shade: Universal Enamel (Translucent)
- Pack: 5 pcs/box
- Indicated for: Crowns, inlays, onlays, veneers, partial crowns
Shade can be individually colour matched through cementation. Giving you control over the aesthetic result.
Ceramir® CAD/CAM C-BLOCKS offer chromatic shade options in four clinical shades — A0 through A3 — allowing dental professionals to achieve natural-looking aesthetic results.
- Size: Standard 12 × 14 × 18 mm
- Shades: A0, A1, A2, A3
- Pack: 5 pcs/box
- Indicated for: Crowns, inlays, onlays, veneers, partial crowns
A brief polish is all it takes to achieve a natural-looking high gloss surface after polishing.
Ceramir® CAD/CAM I-BLOCKS are designed for implant-supported restorations — milled to fit onto titanium base (Ti-Base) abutments available in both Ø S and Ø L.
- Sizes: Ø S and Ø L
- Shades: A0, A1, A2, A3 and Universal Enamel/Translucent Enamel
- Pack: 5 pcs/box
- Compatible with: All systems that provide a Ti-Base interface.
- Indicated for: Implant-supported crowns
The same no-firing workflow as all Ceramir blocks — mill, polish, and cement at the chair. No additional firing required.
Blocktyp
Farbton
Größe
See It In Action
Why Ceramir
Strength. Flexibility. Aesthetics.
Patented laser sintering technology creates a unique combination of strength, flexibility and aesthetics in Ceramir CAD/CAM BLOCK.
High Fracture Resistance
Laser-sintered bioceramic with a flexural strength of 320 MPa, comparable to lithium disilicate. The unique single glass phase gives the material a shock-absorbing effect that helps minimise occlusal stress.
Natural Translucency
T-BLOCK supports shade adaptation through cementation, while C-BLOCK is available in A0, A1, A2 and A3 chromatic shades. High edge stability supports thin margins down to 0.3–0.5 mm, while a short polish provides a natural-looking high-gloss surface under different lighting conditions.
Reduced Chairside Time
Ceramir CAD/CAM BLOCKS are designed for a more effective workflow. Simply mill, polish and cement — no additional firing step or equipment is required, due to the patented laser sintering process.
Trusted by professionals
"Feedback from patients about the crowns has been really great. The bite feels more natural to them, it doesn't feel as heavy as other crowns might. They're smooth, easy to clean — all those things we love."
Dr. Krista Koehler
General Dentist · Stillwater Modern Dentistry · Minnesota, United States
Efficient Workflow
Three Steps to a Finished Restoration
No additional firing required — simply mill, polish, and cement.
Mill
Short milling time. Precise margins and designed to support accurate fit after milling with minimal adjustment required, depending on case and workflow.
Polish
Achieves a high gloss surface similar to natural tooth appearance in minimal polishing time. No additional firing is required.
Cement
Compatible with recommended cementation protocols for adhesive resin-based composite/composite cement. T-BLOCKs can be individually colour-matched through cementation for highly aesthetic results.
Who are we?
A global team ready to support your practice.
Ceramir CAD/CAM BLOCKS is distributed by Directa AB, part of DirectaDentalGroup.
As part of an established international group, we offer global access and local support through our team of sales representatives.
FAQ